| EWAQ080G-XR | EWAQ105G-XR | EWAQ090G-XR | EWAQ130G-XR | EWAQ115G-XR | EWAQ150G-XR | ||||
|---|---|---|---|---|---|---|---|---|---|
| Cooling capacity | Nom. | kW | 75.95 | 100.3 | 86 | 124.8 | 110.5 | 140.8 | |
| Capacity control | Method | Staged | Staged | Staged | Staged | Staged | Staged | ||
| Minimum capacity | % | 50 | 50 | 44 | 44 | 44 | 43 | ||
| Power input | Cooling | Nom. | kW | 26.4 | 34.66 | 29.91 | 43.32 | 39.02 | 49.84 |
| EER | 2.877 | 2.894 | 2.875 | 2.88 | 2.832 | 2.825 | |||
| ESEER | 4.18 | 4.27 | 4.29 | 4.21 | 4.31 | 4.33 | |||
| Dimensions | Unit | Depth | Mm | 2,680 | 3,200 | 3,200 | 3,800 | 3,200 | 3,800 |
| Height | Mm | 1,800 | 1,800 | 1,800 | 1,820 | 1,800 | 1,820 | ||
| Width | Mm | 1,195 | 1,195 | 1,195 | 1,195 | 1,195 | 1,195 | ||
| Weight | Operation weight | kg | 774 | 1,032 | 890 | 1,132 | 1,070 | 1,174 | |
| Unit | kg | 764 | 1,017 | 880 | 1,116 | 1,054 | 1,153 | ||
| Water heat exchanger | Type | Braze plate heat exchanger | Braze plate heat exchanger | Braze plate heat exchanger | Braze plate heat exchanger | Braze plate heat exchanger | Braze plate heat exchanger | ||
| Water volume | l | 5.58 | 4.86 | 4.86 | 5.6 | 5.6 | 8.1 | ||
| Air heat exchanger | Type | Microchannel | Microchannel | Microchannel | Microchannel | Microchannel | Microchannel | ||
| Fan | Air flow rate | Nom. | l/s | 6,787 | 9,023 | 7,356 | 11,309 | 9,023 | 11,309 |
| Speed | rpm | 1,108 | 1,108 | 1,108 | 1,108 | 1,108 | 1,108 | ||
| Compressor | Quantity | 2 | 2 | 2 | 2 | 2 | 2 | ||
| Type | Driven vapour compression | Driven vapour compression | Driven vapour compression | Driven vapour compression | Driven vapour compression | Driven vapour compression | |||
| Sound power level | Cooling | Nom. | dBA | 80 | 84 | 82 | 86 | 86 | 86 |
| Sound pressure level | Cooling | Nom. | dBA | 62 | 66 | 65 | 67 | 68 | 67 |
| Refrigerant | Type | R-410A | R-410A | R-410A | R-410A | R-410A | R-410A | ||
| GWP | 2,088 | 2,088 | 2,088 | 2,088 | 2,088 | 2,088 | |||
| Circuits | Quantity | 1 | 1 | 1 | 1 | 1 | 1 | ||
| Charge | kg | 9.1 | 13.1 | 12.7 | 16.1 | 13.2 | 15 | ||
| Charge | Per circuit | TCO2Eq | 19 | 27.3 | 26.5 | 33.6 | 27.6 | 31.3 | |
| Power supply | Phase | 3~ | 3~ | 3~ | 3~ | 3~ | 3~ | ||
| Frequency | Hz | 50 | 50 | 50 | 50 | 50 | 50 | ||
| Voltage | V | 400 | 400 | 400 | 400 | 400 | 400 | ||
| Compressor | Starting method | Direct on line | Direct on line | Direct on line | Direct on line | Direct on line | Direct on line | ||
| Notes | (1) - Cooling: entering evaporator water temp. 12°C; leaving evaporator water temp. 7°C; ambient air temp. 35°C; full load operation. | (1) - Cooling: entering evaporator water temp. 12°C; leaving evaporator water temp. 7°C; ambient air temp. 35°C; full load operation. | (1) - Cooling: entering evaporator water temp. 12°C; leaving evaporator water temp. 7°C; ambient air temp. 35°C; full load operation. | (1) - Cooling: entering evaporator water temp. 12°C; leaving evaporator water temp. 7°C; ambient air temp. 35°C; full load operation. | (1) - Cooling: entering evaporator water temp. 12°C; leaving evaporator water temp. 7°C; ambient air temp. 35°C; full load operation. | (1) - Cooling: entering evaporator water temp. 12°C; leaving evaporator water temp. 7°C; ambient air temp. 35°C; full load operation. | |||
| (2) - Sound power (evap. 12/7°C, ambient 35°C full load operation) in accordance with ISO9614 and Eurovent 8/1 for Eurovent certified units. Certification refers only to the overall sound power, sound pressure is calculated from sound power level and used for info only, not considered bounding | (2) - Sound power (evap. 12/7°C, ambient 35°C full load operation) in accordance with ISO9614 and Eurovent 8/1 for Eurovent certified units. Certification refers only to the overall sound power, sound pressure is calculated from sound power level and used for info only, not considered bounding | (2) - Sound power (evap. 12/7°C, ambient 35°C full load operation) in accordance with ISO9614 and Eurovent 8/1 for Eurovent certified units. Certification refers only to the overall sound power, sound pressure is calculated from sound power level and used for info only, not considered bounding | (2) - Sound power (evap. 12/7°C, ambient 35°C full load operation) in accordance with ISO9614 and Eurovent 8/1 for Eurovent certified units. Certification refers only to the overall sound power, sound pressure is calculated from sound power level and used for info only, not considered bounding | (2) - Sound power (evap. 12/7°C, ambient 35°C full load operation) in accordance with ISO9614 and Eurovent 8/1 for Eurovent certified units. Certification refers only to the overall sound power, sound pressure is calculated from sound power level and used for info only, not considered bounding | (2) - Sound power (evap. 12/7°C, ambient 35°C full load operation) in accordance with ISO9614 and Eurovent 8/1 for Eurovent certified units. Certification refers only to the overall sound power, sound pressure is calculated from sound power level and used for info only, not considered bounding | ||||
| (3) - Fluid: Water | (3) - Fluid: Water | (3) - Fluid: Water | (3) - Fluid: Water | (3) - Fluid: Water | (3) - Fluid: Water | ||||
| (4) - For more details on the operating limits please refer to the Chiller Selection Software (CSS). | (4) - For more details on the operating limits please refer to the Chiller Selection Software (CSS). | (4) - For more details on the operating limits please refer to the Chiller Selection Software (CSS). | (4) - For more details on the operating limits please refer to the Chiller Selection Software (CSS). | (4) - For more details on the operating limits please refer to the Chiller Selection Software (CSS). | (4) - For more details on the operating limits please refer to the Chiller Selection Software (CSS). | ||||
| (5) - Equipment contains fluorinated greenhouse gases. Actual refrigerant charge depends on the final unit construction, details can be found on the unit labels. | (5) - Equipment contains fluorinated greenhouse gases. Actual refrigerant charge depends on the final unit construction, details can be found on the unit labels. | (5) - Equipment contains fluorinated greenhouse gases. Actual refrigerant charge depends on the final unit construction, details can be found on the unit labels. | (5) - Equipment contains fluorinated greenhouse gases. Actual refrigerant charge depends on the final unit construction, details can be found on the unit labels. | (5) - Equipment contains fluorinated greenhouse gases. Actual refrigerant charge depends on the final unit construction, details can be found on the unit labels. | (5) - Equipment contains fluorinated greenhouse gases. Actual refrigerant charge depends on the final unit construction, details can be found on the unit labels. | ||||
| (6) - Allowed voltage tolerance ± 10%. Voltage unbalance between phases must be within ± 3%. | (6) - Allowed voltage tolerance ± 10%. Voltage unbalance between phases must be within ± 3%. | (6) - Allowed voltage tolerance ± 10%. Voltage unbalance between phases must be within ± 3%. | (6) - Allowed voltage tolerance ± 10%. Voltage unbalance between phases must be within ± 3%. | (6) - Allowed voltage tolerance ± 10%. Voltage unbalance between phases must be within ± 3%. | (6) - Allowed voltage tolerance ± 10%. Voltage unbalance between phases must be within ± 3%. | ||||
| (7) - Maximum starting current: starting current of biggest compressor + current of the other compressors at maximum load + fans current at maximum load. In case of inverter driven units, no inrush current at start up is experienced. | (7) - Maximum starting current: starting current of biggest compressor + current of the other compressors at maximum load + fans current at maximum load. In case of inverter driven units, no inrush current at start up is experienced. | (7) - Maximum starting current: starting current of biggest compressor + current of the other compressors at maximum load + fans current at maximum load. In case of inverter driven units, no inrush current at start up is experienced. | (7) - Maximum starting current: starting current of biggest compressor + current of the other compressors at maximum load + fans current at maximum load. In case of inverter driven units, no inrush current at start up is experienced. | (7) - Maximum starting current: starting current of biggest compressor + current of the other compressors at maximum load + fans current at maximum load. In case of inverter driven units, no inrush current at start up is experienced. | (7) - Maximum starting current: starting current of biggest compressor + current of the other compressors at maximum load + fans current at maximum load. In case of inverter driven units, no inrush current at start up is experienced. | ||||
| (8) - Nominal current in cooling mode: entering evaporator water temp. 12°C; leaving evaporator water temp. 7°C; ambient air temp. 35°C. Compressor + fans current. | (8) - Nominal current in cooling mode: entering evaporator water temp. 12°C; leaving evaporator water temp. 7°C; ambient air temp. 35°C. Compressor + fans current. | (8) - Nominal current in cooling mode: entering evaporator water temp. 12°C; leaving evaporator water temp. 7°C; ambient air temp. 35°C. Compressor + fans current. | (8) - Nominal current in cooling mode: entering evaporator water temp. 12°C; leaving evaporator water temp. 7°C; ambient air temp. 35°C. Compressor + fans current. | (8) - Nominal current in cooling mode: entering evaporator water temp. 12°C; leaving evaporator water temp. 7°C; ambient air temp. 35°C. Compressor + fans current. | (8) - Nominal current in cooling mode: entering evaporator water temp. 12°C; leaving evaporator water temp. 7°C; ambient air temp. 35°C. Compressor + fans current. | ||||
| (9) - Maximum running current is based on max compressor absorbed current in its envelope and max fans absorbed current | (9) - Maximum running current is based on max compressor absorbed current in its envelope and max fans absorbed current | (9) - Maximum running current is based on max compressor absorbed current in its envelope and max fans absorbed current | (9) - Maximum running current is based on max compressor absorbed current in its envelope and max fans absorbed current | (9) - Maximum running current is based on max compressor absorbed current in its envelope and max fans absorbed current | (9) - Maximum running current is based on max compressor absorbed current in its envelope and max fans absorbed current | ||||
| (10) - Maximum unit current for wires sizing is based on minimum allowed voltage. | (10) - Maximum unit current for wires sizing is based on minimum allowed voltage. | (10) - Maximum unit current for wires sizing is based on minimum allowed voltage. | (10) - Maximum unit current for wires sizing is based on minimum allowed voltage. | (10) - Maximum unit current for wires sizing is based on minimum allowed voltage. | (10) - Maximum unit current for wires sizing is based on minimum allowed voltage. | ||||
| (11) - Maximum current for wires sizing: (compressors full load ampere + fans current) x 1.1 | (11) - Maximum current for wires sizing: (compressors full load ampere + fans current) x 1.1 | (11) - Maximum current for wires sizing: (compressors full load ampere + fans current) x 1.1 | (11) - Maximum current for wires sizing: (compressors full load ampere + fans current) x 1.1 | (11) - Maximum current for wires sizing: (compressors full load ampere + fans current) x 1.1 | (11) - Maximum current for wires sizing: (compressors full load ampere + fans current) x 1.1 | ||||
| (12) - Unit performances refer to ideal running conditions that are reproducible in laboratory test environment in accordance to recognized industry standards (i.e. EN14511) | (12) - Unit performances refer to ideal running conditions that are reproducible in laboratory test environment in accordance to recognized industry standards (i.e. EN14511) | (12) - Unit performances refer to ideal running conditions that are reproducible in laboratory test environment in accordance to recognized industry standards (i.e. EN14511) | (12) - Unit performances refer to ideal running conditions that are reproducible in laboratory test environment in accordance to recognized industry standards (i.e. EN14511) | (12) - Unit performances refer to ideal running conditions that are reproducible in laboratory test environment in accordance to recognized industry standards (i.e. EN14511) | (12) - Unit performances refer to ideal running conditions that are reproducible in laboratory test environment in accordance to recognized industry standards (i.e. EN14511) | ||||
| (13) - Weight and dimensions are indicative, for specific values refer to certified drawings issued by the factory | (13) - Weight and dimensions are indicative, for specific values refer to certified drawings issued by the factory | (13) - Weight and dimensions are indicative, for specific values refer to certified drawings issued by the factory | (13) - Weight and dimensions are indicative, for specific values refer to certified drawings issued by the factory | (13) - Weight and dimensions are indicative, for specific values refer to certified drawings issued by the factory | (13) - Weight and dimensions are indicative, for specific values refer to certified drawings issued by the factory | ||||
| (14) - For specific information about additional options refer to the options section in the data book | (14) - For specific information about additional options refer to the options section in the data book | (14) - For specific information about additional options refer to the options section in the data book | (14) - For specific information about additional options refer to the options section in the data book | (14) - For specific information about additional options refer to the options section in the data book | (14) - For specific information about additional options refer to the options section in the data book | ||||